The 1860 and 1860S healthcare respirators are designed to help provide respiratory protection for the wearer against certain airborne particles. They meet CDC guidelines for Mycobacterium tuberculosis exposure control.

As disposable particulate respirators, they are intended to reduce wearer exposure to certain airborne particles including those generated by electrocautery, laser surgery, and other powered medical instruments. As surgical masks, they are designed to be fluid resistant to splash and spatter of blood and other infectious materials.

The 1860 and 1860S particulate respirators are personal protective equipment (PPE) that are primarily intended to protect the health care workers by reducing exposure toharmful airborne particles which are small  enough to be inhaled – typically particles less than 100 microns in size.

These include airborne particles that may contain biological material e.g. Bacillus anthracis, Mycobacterium tuberculosis, mould and the virus that causes Severe Acute Respiratory Syndrome (SARS), and Influenza.

Features
• NIOSH approved N95 rating
• FDA cleared for use as a surgical mask
• Fluid Resistance 80 mmHg
• Flammability Rating Class I
• Adjustable nose clip
• Braided and stapled headbands
• Particulate Respirator and Surgical Mask

Use For
• Intended to be worn by operating room personnel during surgical procedures to help protect both the surgical
patient and the operating room personnel from transfer of microorganisms, body fluids, and particulate material.
• Always follow User Instructions and use in manners as indicated.

Do Not Use for
• DO NOT use in industrial settings
• DO NOT use for gases or vapours (i.e. anesthetic gases such as isoflurane or vapours from sterilants such as
glutaraldehyde.)
• DO NOT use in any manner not indicated in the User Instructions

Approvals and Standards
• NIOSH approved N95 respirator
• Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid
aerosols that do not contain oil.
• NIOSH approval number: TC-84A-0006
• FDA cleared for use as a surgical mask
• Health Canada Class I medical device
• Bacterial Filtration Efficiency F2101 >99% BFE
• OSHA Assigned Protection Factor (APF) 10
• Australia TGA approved

Fitting Instructions
Must be followed each time the respirator is worn. Before fitting device, ensure hands are clean. See Figure 1 below. All respirator components should be inspected for damage prior to each use.
1. Cup respirator in one hand with nosepiece at fingertips, allow headbands to hang freely below hand.
2. Hold respirator under chin, with nosepiece up.
3. Locate the upper strap across the crown of the head and the lower strap below the ears.
4. Straps must not be twisted.
5. Using both hands, mould noseclip to the shape of the nose to ensure a close fit and good seal. Pinching the noseclip using only one hand may result in less effective respirator performance.
6. The seal of the respirator on the face should be fit-checked before entering the workplace.

Attention: This product is available for bulk purchase only. Minimum order quantity 1 Lac pieces. available 5 lac pcs.