Aluminum plastic separation recycling machine is used for separating aluminum and plastic from waste aluminum plastic composite materials. With a wide range of applicability, it can handle many common materials in life, such as waste aluminum plastic composite panels, aluminum plastic medicine packaging, aluminum plastic decorative board, etc.

The process of aluminum plastic separation recycling machine as follows:

1, Crushing
Crusher will cut the aluminum plastic composite panels into small pieces, because the composite panels are too big to process.

2, Grinding
Due to the good adhesion between plastic and aluminum, it is still difficult to deal with these composite panels pieces. So, it is necessary to grind the small pieces into powder with a grinder to make them easy to separate.

3, Circulation water cooling
However, it should be noted that the heat generated by the grinder will burn some pieces, thereby reducing the separation rate. Therefore, the circulating water cooling system should be used to reduce the temperature during the grinding process.

4, Sieving
The eddy-vibrating screen will sent those pieces without grinding back to the grinding mill to continue grinding. Those completely grind powder will go to the next step.

5, Electrostatic separation
According to the different conductivities between aluminum and plastic, the electrostatic separator can easily separate aluminum and plastic from aluminum plastic composite materials.