Liquid photoimageable plating resist ink can form a cured film, which can provide such performance as high resolution ,excellent adhesion and good resistance to plating and etching.

Brief introduction:
KSM-P3166 is single component liquid photoimageable plating and etching resist ink , which is roller coating type. The cured film can provide high resolution , excellent adhesion and good resistance to plating and etching. The boards can be plated copper , tin ,nickel and aurum without high temperature post-baking after developing. The ink is fit to make double-surface and multiple-layer dense circuit boards.

Description:
Product name: Liquid photoimageable plating-resist Ink
Model: KSM-P3166
1. The quality of Liquid photoimageable plating-resist Ink is very excellent, suitable for the manufacture of high-end electronic products, the price is moderate.
2. It is recommended to use KSM-P3166, which is a two-component, screen-printed high-precision alkaline liquid imaging solder resist ink for double-sided and multi-layer printed circuit boards for precision circuits. The flatness is good, and the post-cured coating film has excellent adhesion, chemical resistance and heat resistance.
3. Liquid photosensitive solder resist ink has good printing properties, its density, heat resistance, chemical resistance is extremely excellent, has a wide range of operating conditions, is a very general and easy to operate, highly acceptable ink.

Parameters:
Color:Blue
Viscosity (25ºC): 10± 2d Pa.s VT-04F
Fineness: ≤5µm 0 ~25µm Fineness gauge
Solid content: 50±5%
Density(25ºC): 1.10~1.20 g/ml
Resolution: 50µm (2.0mil)
Adhesion: 100/100 Laceration experiment
Plating resistance: Copper ,Tin ,Nickle and Aurum Normal plating technics
Hardness: ≥2H Pencil harder
Etching : Acidic/Alkaline etching solution
Pre-baking limit : 75℃, 60min

Package Base : 5.0kg/bucket, 10kg/box According to customer requirements
Shelf life: 6 months since the date of manufacture Store below 25℃ in dark

Attention :
1. Mixing the ink fully before using.
2. We will offer you special diluent or DPM if the ink need dilute.
3. The values above are based on experiments in our lab. Experiments need to be carried out in order to get proper using condition.