PET Release Film for Screen Printing and Offset Printing

This PET Release Film is specifically designed for both screen printing and offset printing applications. The film is available in two sizes—39x54cm and 48x64cm—making it adaptable to various printing requirements. Its transparent color and special coating provide an anti-static and anti-sticky surface, ensuring smooth operation during the printing process.

This product is available in two thicknesses: 75 microns and 100 microns. The film can be utilized for both hot and cold peel applications, making it versatile for different printing techniques. Users can achieve multiple finishes, including glossy, flat, and matte, depending on their specific needs.

Quick Details:

• Polyester PET released film for screen printing and offset printing.
  
• It can be both hot and cold peel. The face is matt result
  
• Thickness:7 5micron and 100micron
  
• Sheet size: 39x54cm and 48x64cm also can be roller
  
• Applicable to: offset printing and screen printing
  
• Special coating: Anti sticky, anti-static
  
• Multiple finish: Glossy, flat, matt
  
• Peeling way: cold peel, hot peel, both hot and cold peel

Attention Matters during Products Using:

1. Before transfer, keep printing substrates clean and tidy.
2. At printing and production, avoid contact with sharp objects, in order to avoid scratches, impact effect
3. At printing and production, avoid contact with hot objects
4. Offset printing, pay attention to the light to take and light put, prevent scratch color printing design.
5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick. And enter pump suction wet room 12 h about 40 ℃, after the offset printing ink drying, then screen printing.
6. This product is applicable to water, oily silk screen printing ink
7. After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bits of film not accurate
8. Before transfer the image, cut out the other parts of the blank and with 2 mm border.
9. Transfer temperature:130℃-150℃, Transfer time:6-15s Press:20-30 pounds
10. Machine time out, lift or move the machine heating panel, please be sure to tear up the film above immediately

By ensuring quality and durability, this film adds value to the production process, helping users meet their printing demands effectively.