Punching Machine for Aluminum Cap is an efficient and reliable solution for aluminum cap manufacturing. Created by Zouping Taialu Industry Co. Ltd, this machine is designed to streamline the production process with high precision and rapid performance. It features a 16-ton power press compatible with 380V and 440V, and a mold with five cavities for 20mm caps, ensuring the production of quality caps at an impressive rate of 40,000-45,000 caps per hour.

The machine comes with advanced features like a self-lubrication system, an uncoiler, and a servo motor-powered material feeder, enhancing its reliability and ease of use. The control system includes an Electronic Control Unit (ECU) and touch screen interface for easy operation. With a  aluminum coil lubrication system, air generators, and a ring separator, it offers a comprehensive cap manufacturing solution.

Punching Machine for Aluminum Cap:

1. Components of the Machine
   a. 16 tons power press, 380V (compatible with 440V);
   b. Mould with 5 cavities for 20mm cap, made as per customer’s cap drawing and samples;
   c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires.
   d. Uncoiler and servo motor powered material feeder;
   e. Aluminum coil lubrication system;
   f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing, one mechanical air generator for ring blowing, air outlets and connection tubes;
   g. Ring separator and conveyor belt;
   h. Recoiler of waste material;
   i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;
   j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
   k. Self-lubrication system of punching machine, including pump, tubes and oil container.1.2 Capacity: 40000-45000 caps/hour for 20mm; The design working speed is 150 times/min, while the speed 135-145 times/min is the most stable condition;
   
   
2. Aluminium coil width: 152mm (or 151mm by final trial)
   
   
3. Spare parts (no addition cost): 50% parts of the 5 cavities.
   
   
4. Tools: Standard tools for repair and maintenance of the machine & mould.
   
   
5. Installation dimension: 1700*1300*1900mm;
   
   
6. Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground.
   
   
7. Punching Oil required: 10# industrial white oil.

Designed with user safety in mind, the machine includes a mold protection system, infrared sensors, and a hand protection system. The compact installation dimension of 1700x1300x1900mm and the requirement of a single 380V, 3-phase wire make it convenient to install without the need for ground fixing.

This punching machine is ideal for manufacturers aiming to increase productivity while ensuring consistent product quality.