Raymond Mill Intorduction

Brand: Clirik
Model: YGM
Application: Can be used in more than 300 kinds of stone materials powder making, including: calcium carbonate, dolomite, feldspar, marble, barite, talc, carbon black, gypsum, calcite and so on.
Input Size: Below 25 mm.
Output Size: Could be adjusted between 50-450 mesh.
Capacity: According to your fineness choose, the capacity is about 1-20 t/h.

Raymond Mill Advantages

1.Compared with the ball mill, the Raymond mill has higher efficiency, lower power consumption, smaller covered area, less investment.

2.The grinding roller compressed on the grinding ring tightly due to the centrifugal force.

3.The output and fineness of the finished product will not be affected when the grinding ring is worn to a certain degree.

4.The grinding roller and the grinding ring have a long replacement period, so it gets rid of the shortcoming that the wear parts of centrifugal mills have a short replacement period.

5.The classifying airflow of the Raymond mill flows according to the recycling process as: the fan mill shell cyclone separator the fan.

6.Compared with the high speed centrifugal grinder, there is less powder dust, and the operation room is clean without any pollution.

Raymond Mill Working Principle

The rollers tightly rolled on the ring under the effect of centrifugal force. Shovel sends material between the roller and ring and the material is grinded into powder under the high pressure.Then the fan blows the power up into the analyzer. At this time, the power material met the fineness requirement get through the analyzer and get into the power cyclone separator while the others will be sent back for re-grinding.The whole system is airtight circulation.