Lacing anchors are used in the fabrication of insulation blankets or removable covers/pads, generally made of stainless steel and low-carbon steel with polishing and zinc plated.

It consist of a pin and round base plate with hook, the nail through the center of the base plate, fixing tightly. The nail is sharp and soft, then it is easy to throw an insulation blanket and bend it after fixing the blanket with a self-locking washer.

The round lacing anchors head is 7/8″(22mm) diameter, come with 1mm thickness, the nail diameter is 12 Gauge(2.7mm)/14 Gauge(2.2mm), and the length is 2.5″ /4.5″ (63.5mm/114.3mm), or if you have specific request for it, we can customize it for you.

The stainless steel lacing anchors are used with insulation washers for removable or reusable insulation blankets/jackets. The nail is pressed through the insulation material, so the hook portion sits on the top edge and the nail is secured on the opposite side of the insulation with a washer. The two sides of the blanket can then be “laced” together by the hooks with tie wire.

Removable Insulation Blanket Lacing Anchors

• Material 304 stainless steel
  
• low carbon steel is availbe
  
• Surface treatment Stainless steel: polishing
  
• Low carbon steel: galvanized coating
  
• Head type Round(rectangle is available)
  
• Head diameter 7/8″(22mm)
  
• Head thickness 1mm
  
• Pin diameter 12 Gauge(2.7mm)/14 Gauge(2.2mm)
  
• Pin length 2.5″ /4.5″ (63.5mm/114.3mm)
  
• Application Removable insulation blankets or jackets
  
• Packing 1000pcs/carton