MODEL EGX-350
Table Size 12”(X) x 9.1”(Y) [305 mm x 230 mm]
Max. Cutting Area 12”(X) x 9.1”(Y) x 1.6” [305 mm(X) x 230 mm (Y)] x 40mm(Z)
Feed Rate X, Y-axis : Up to 2.4 ips (60mm/sec). Z-axis : Up to 1.2 ips (30mm/sec)
Software Resolution 0.004” (0.01 mm) /step or 0.001” (0.025 mm ) /step (XY axis only)
Mechanical Resolution X, Y -axis : 0.0001 in. (0.0025 mm) /step
Spindle Motor Brushless DC motor, max. 50 W
Revolution Speed 5,000 to 20,000 rpm
Tool Chuck Cutter holder and collet
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)
Instrction System RML-1
Power Requirements AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)
Acoustic Noise Level During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) (According to ISO 7779)
External Dimentions 15.5" (W) x 24.3" (D) x 23.3" (H) [393 (W) x 616 (D) x 591 (H) mm] When cover is open: 23.56" x 21.5" x 27" [598 mm (W) x 545 mm (D) x 685 mm]
Weight 75 lb. (34 kg)
Operation Temperature 41 to 104 °F(5 to 40 °C )
Operation Humidity 35 to 80 % (no condensation)
Accessories Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudioTM CD-ROM, Roland Software Program Guide, Roland EngraveStudioTM Program Guide, and User's Manual

Roland EngraveStudio™ System Requirements
OS Windows VistaTM (32-bit edition), Windows® XP, or Windows® 2000
CPU Pentium® III, 1 GHz or faster recommended
RAM Windows Vista: 512 MB or more recommended
Windows XP/2000: 256 MB or more recommended