Product Description
Model EGX-360
Workpiece-table size

Width x depth: 12 x 9.1 in. (305 x 230 mm)

Cuttable Materials

Flat Engraving/ Cylindrical Engraving

Acrylics, aluminum, brass, stainless steel, and glass (*)

Ring Engraving, Inner or Outer Surface (**)

Brass, silver, gold, etc.

Loadable Workpiece Weight (when using the motorized vise jaw)

9.4 lbs (4.3 kg), including the weight of jig

X, Y, and Z Operation Strokes

X, Y, and Z: 12 x 9.1 x 1.6 in. (305 x 230 x 40 mm)

Maximum Angle of Rotation

During engraving: ±360°

X-, Y-, Z-, and A-axis Drive System

Stepping motor

Operating Speed

X and Y axes: 0.004 to 2.4 in./sec (0.1 to 60 mm/sec.)
Z axis: 0.004 to 1.2 in./sec (0.1 to 30 mm/sec.)
A axis: 9 rpm

Mechanical Resolution

X and Y axes: 0.0001 in./step (0.0025 mm/step)
Z axis: 0.00005 in./step (0.00125 mm/step)
A axis: 0.045°

Spindle Motor

Brushless DC motor, maximum 50 W

Spindle Speed

5,000 to 20,000 rpm

Tool Chuck

Cutter holder, collet method

Loadable Workpiece Thickness
(when using the flat table)

Maximum 3.1 in. (80 mm), 3.0 in. (78 mm) when nose unit is used

Interface

USB (compliant with Universal Serial Bus Specification Revision 1.1)
Serial (RS-232C-compliant)

Internal Memory

4 MB

Control Command Set

RML-1

Required Power-Supply

Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1)
Required power capacity: 1.9 A (100 to 120 V)/0.8 A (220 to 240 V)

Power Consumption

80 W

Operating Noise

During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or less (as specified by ISO 7779)

External Dimensions

Height x width x depth: 29.8 x 25.2 x 26.6 in. (755× 639× 675 mm)

Weight

186 lb (84 kg)

Installation Environment

Operating environment: Temperature of 41 to 104°F (5 to 40°C), 35 to 80% relative humidity (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)

Included Items

Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), diamond scriber (diameter 4.36 mm), flat table, spare mounting screw (for the cutter holder), wrench, solid collet for diamond scraper (diameter 4.36 mm), solid collet (diameter 4.36 mm) , solid collet (diameter 3.175 mm), Cylindrical-engraving adapter, cup cones, face plates, Standard jigs, Pen jigs, water nose attachment, face-plate mounting screws, standard-jig retaining screw, pin jigs, flat-table securing screw, hexagonal screwdriver, hexagonal wrench, handy panel, adhesive sheet, lubricant filter, vacuum adapter for chip cleaning, Dust tray, USB cable, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM, Roland EngraveStudio Software Guide, and EGX-360 Startup and Maintenance Guide.

Supported Operating Systems

Windows 2000/XP/VISTA (32 bit only)